Home / Services / Ducting Fabrication & Installation

Built and Fitted to Your Layout

Ducting Fabrication & Installation in Dubai

New fit-outs, partition changes and restaurant refurbishments often need ductwork altered or fabricated from scratch. HILLS AC Services fabricates galvanised iron ducting, pre-insulated panels and flexible ducts to match your exact layout, and handles modification, re-routing, insulation and sealing for existing systems. Work is scheduled to fit around your fit-out programme and finished with a full inspection.

What's Included

Ducting Fabrication & Installation: Options & Pricing

Every price is confirmed in writing after an inspection or site survey, before any work begins.

GI Ducting Fabrication

Custom galvanised iron sheet metal ducting, pre-insulated panels and flexible ducts fabricated and fitted for new layouts.

Duct losses are invisible and expensive: cooled air escaping into a ceiling void is paid for and never delivered. We inspect the runs, seal failed joints, and replace insulation that has been compressed or damaged by other trades working above the ceiling. Where a room has never cooled properly, this is very often the cause rather than the unit itself.

Duct Modification & Re-Routing

Re-routing, extensions and register relocation to match new partitions, ceilings or restaurant floor plans.

Duct losses are invisible and expensive: cooled air escaping into a ceiling void is paid for and never delivered. We inspect the runs, seal failed joints, and replace insulation that has been compressed or damaged by other trades working above the ceiling. Where a room has never cooled properly, this is very often the cause rather than the unit itself.

Duct Insulation & Sealing

Fibreglass wool and closed-cell foam insulation, vapour barriers and mastic sealing to stop air leaks and condensation.

Duct losses are invisible and expensive: cooled air escaping into a ceiling void is paid for and never delivered. We inspect the runs, seal failed joints, and replace insulation that has been compressed or damaged by other trades working above the ceiling. Where a room has never cooled properly, this is very often the cause rather than the unit itself.

Fire & Smoke Damper Servicing

Installation, testing, resetting and servicing of motorised fire dampers and fusible-link mechanisms within duct lines.

Fire and smoke dampers are life-safety devices that spend years untested. We verify each operates and reseats, clear obstructions, and document the result with location references. This is a compliance item as much as a maintenance one, and the report is what an inspector will ask to see.

FAQ

Frequently Asked Questions

Yes, our team fabricates galvanised iron ducting and pre-insulated panels to match existing layouts as well as entirely new designs.

Yes, kitchen extract ducting, fire damper installation and grease duct fabrication are all part of our restaurant fit-out work.

Most modification and re-routing jobs are completed within one to three days depending on scope, confirmed during the site survey.

A typical apartment takes two to four hours and a villa most of a working day, depending on the number of vents and how the ductwork is laid out. We confirm the duration at the inspection so you can plan access.

No. We seal the vents, sheet the floors and cover furniture before starting, and the debris is drawn out through a HEPA-filtered vacuum rather than pushed into the room. A domestic vacuum returns fine particulate straight back into the air, which is why we do not use one.

Related Services

You Might Also Need

HVAC & Chiller Services

Larger buildings rely on chillers, cooling towers and air handling units that need specialist attention.…

Plant work scheduled around occupancy, with readings taken and recorded rather than described. Heat-transfer surfaces, control settings and water quality are checked together, because efficiency loss on this equipment is gradual and invisible until someone measures it. Reports are issued in the format facilities managers and inspectors expect, and we work evenings or shutdown windows where occupants cannot be disrupted.

AC Installation

Choosing and fitting the right AC system matters as much as maintaining it afterwards. HILLS AC Services…

Supply, positioning, refrigerant or chilled-water piping, electrical connection and commissioning, coordinated with whoever else is working on the ceiling. We survey before quoting because unit sizing and pipe runs are where installations go wrong, and an undersized system cannot be corrected afterwards without replacing it. Commissioning readings are recorded and handed over, so you have evidence the system performs to specification on day one.

AC Duct Cleaning

Dubai's dust and heavy air-conditioning use mean supply and return ducts fill with debris far faster than…

Rotary brushes agitate the debris while a HEPA-filtered vacuum draws it out under negative pressure, so nothing is pushed into the room. Vents are sealed, floors sheeted and furniture covered before we start. A typical apartment takes two to four hours and a villa most of a working day, depending on outlet count. Every duct is photographed before and after and the report goes to your WhatsApp the same day.

Ducting Fabrication & Installation by Community

156 Dubai communities, each with its own page.

Inspection & Quote

Get Fixed Price for Ducting Fabrication & Installation

Tell us the property and we will confirm a fixed written price after an inspection.

No obligation. Your details stay private.

✓ Thanks! Opening WhatsApp so you can send your request. Our team replies fast.
Why It Matters

Why ducting fabrication & installation is worth doing properly

Dubai's conditions are unusually hard on air distribution. Fine desert sand and construction dust load a system in weeks rather than months, and coastal humidity keeps the interior of the ductwork damp for most of the year. That combination is what allows mould, bacteria and dust mites to establish inside a duct network, and every time the unit cycles it circulates into the room people are breathing in.

The consequence is rarely dramatic. It shows up as morning congestion that clears when you leave the house, a musty smell in the first minute after start-up, and a cooling system that runs longer each year for the same result. By the time it is obvious, the household has usually been paying for it on the DEWA bill for a considerable time.

Why HILLS

We inspect before quoting, and the written price we give is the price you pay. No revision once the work has started, and no discovery of additional scope on the day. Where a job falls outside what we do, we say so rather than taking it on.

Every job is documented. Photographs before and after go to your WhatsApp the same day, and certificates are issued where one is needed for inspection. The equipment is proper trade kit — HEPA-filtered extraction, calibrated instruments and cameran inspection — because diagnosis before parts is what keeps a quote honest.

We have worked on Dubai cooling since 2021, across 67 communities and everything from a single split unit in a JVC apartment to chiller plant rooms and commercial kitchen extract systems. That range matters, because it means the person who attends has seen your system type before.

Ready to Book Ducting Fabrication & Installation?

Inspection first, fixed price, honest advice.